Phoenix office moves

Office Furniture Relocation in Phoenix, AZ

How a Phoenix office move handles the furniture: what to take, how it is tagged, moved and reinstalled, and what happens to the pieces that do not fit the new space.

8 minute read
Office Furniture Relocation in Phoenix, AZ

Photo: DPPed, CC BY-SA 3.0, via Wikimedia Commons

Short answer: Office Station relocates office furniture between locations across Greater Phoenix. Crews inventory and tag what you own, take it down, move it and reinstall it to the plan for the new suite. Furniture that does not fit is cleared from the old space in the same project, and any gaps are filled with pre-owned, remanufactured or new pieces. Space planning for the new office is free, and every project is quoted individually.

What a furniture relocation covers

An office move is really two projects that share a calendar: getting out of the old space and getting set up in the new one. The furniture sits in the middle of both. Some of it moves, some of it stays behind, and some of the new suite has to be furnished from scratch. Handling all three with one team avoids the most common problem in Phoenix moves, which is paying rent on two suites because the old one is not yet clear.

A furniture relocation typically includes:

  • A walkthrough of the current office and, where possible, the new suite
  • A space plan for the new suite drawn with the furniture you already own
  • An inventory with tags tied to the new floor plan
  • Electrical disconnects, teardown, protection and transport
  • Reinstallation, leveling and reconnection in the new suite
  • Clearing the surplus from the old space, with a broom-clean handback
  • Gap-fill furniture for anything the new plan needs that you do not have

Office Station handles the furniture. Boxes, files, IT equipment and personal items are usually packed by your staff or a general mover, and the schedules are coordinated so the furniture crew is not waiting on them. The wider move process, including IT and building logistics, is on corporate relocation and the corporate office relocation checklist.

Move it, clear it or replace it

Not everything should make the trip. New suites in Phoenix are often a different shape from the old one, with different column spacing, window lines and power locations, and furniture that fit perfectly in one building can waste space in the next. Deciding piece by piece before move day keeps the crew moving only what will be used.

DecisionUsually the right call whenWhat happens
Move itThe furniture is in good condition, fits the new floor plate and suits the new layoutTagged, taken down, moved and reinstalled to the new plan, reconfigured if needed
Clear itIt does not fit, is surplus to the new headcount or is worn past the point of movingRemoved from the old space and routed to resale, donation or recycling with an itemized inventory
Replace itThe new plan needs a different station size, panel height or type of furnitureOld pieces cleared; matching pre-owned, remanufactured or new furniture installed in the new suite
Store it brieflyThe new suite is not ready on the day the old one must be emptyShort-term storage between the move-out and move-in dates, arranged as part of the quote

Large conference tables, reception desks and built-in millwork deserve their own check. Big tables may not fit the new freight elevator in one piece, and millwork fastened to walls is often a lease question rather than a furniture question. Surplus furniture from the old space is covered on Phoenix office furniture liquidation and commercial furniture removal in Phoenix.

Inventory and tagging

The inventory is what makes reinstall day go smoothly. Every station, chair, file and table that moves gets a tag tied to a location on the new floor plan. Panel systems are tagged by run, so the parts that came off one cluster go back up together, with the same connectors, worksurfaces and pedestals.

  • Count by type. Stations by size and panel height, chairs by model, storage by type and drawer count.
  • Note condition. Worn fabric, chipped edges and broken mechanisms are recorded so you can decide whether to move, refresh or clear each piece.
  • Match to the plan. Each tag carries a zone or room in the new suite, and staff label their own boxes with the same codes.
  • Record power. Powered panels and the circuits they use are noted, so the electrician knows what to disconnect and where it reconnects.

The inventory doubles as the record of what left the old building, which helps with the landlord walkthrough at move-out.

Teardown, transport and reinstall

A Phoenix move usually runs in this order:

  • Disconnect. A licensed electrician disconnects powered panels, and your IT team pulls equipment from desks.
  • Teardown. Panels, worksurfaces, overheads and pedestals come apart and are staged by tag. Chairs and storage are wrapped.
  • Transport. Furniture is loaded by dock or liftgate and moved across the Valley, with floor and elevator protection at both buildings.
  • Reinstall. Runs go up to the new plan, are leveled and squared, and powered panels are reconnected by the electrician.
  • Clear the old space. Surplus is removed after the new suite is working, and the old suite is handed back broom-clean.

Most offices want to lose as few working days as possible, so crews often work evenings and weekends. Larger offices are moved in phases, one department at a time, with each phase tested before the next one starts. If the new plan changes station counts or panel heights, the reinstall becomes a reconfiguration, covered on office reconfiguration in Phoenix.

Filling gaps in the new space

A move rarely lands with exactly the right furniture. The new suite may have more private offices, a larger conference room, a reception area the old space lacked or room for more stations. Gap-fill furniture is planned in the same space plan and timed to land on move week.

GradeLead timeCommon gap-fill use
Liquidation gradeInstalled in as little as 72 hours when in stockExtra workstations and seating that match an existing run
RemanufacturedUsually 7 to 14 daysStations re-covered so moved and added furniture share one finish
New4 to 6 weeksReception, conference and private offices sized to the new rooms

Office Station is an independent reseller, not an authorized dealer of any manufacturer, and manufacturer warranties generally do not transfer to pre-owned furniture. Everything available for a Phoenix office is on office furniture in Phoenix, and the layout itself starts with a free Phoenix space plan.

Phoenix buildings and summer moves

A move involves two buildings, and each has its own rules. Downtown and Midtown towers book a shared dock and freight elevator by the hour, and light rail on Central Avenue, Washington and Jefferson limits where trucks can stand. Camelback Corridor towers often ask for specific certificate of insurance wording and after-hours windows. Many Airpark and business-park suites have no dock, so trucks load by liftgate from the lot. Confirm both buildings' rules before setting the move date.

Heat changes the schedule from May through September. Loading starts at first light or runs overnight, and furniture is not left in a closed trailer, where laminate edges and seat foam suffer. Ask both buildings to keep the air conditioning on during the move, because new suites sometimes have power before they have cooling. Monsoon afternoons can bring dust and rain, so summer moves carry a buffer and upholstered pieces stay wrapped.

Moving across the Valley

Crews move offices between any two points in Greater Phoenix. Each city has a page for clearing the old space and a page for furnishing the new one:

Moving into a smaller space? Office downsizing in Phoenix covers deciding what to keep. Leaving the old suite under a restoration clause? See office decommissioning in Phoenix.

Request a relocation quote

Send both addresses, your headcount, a floor plan of the new suite and your move date to hello@officestation.com or through the contact page. The walkthrough and the space plan for the new office are both free.

Frequently asked questions

Do you move office furniture between Phoenix locations?

Yes. Office Station relocates office furniture across Greater Phoenix: cubicles and panel systems, desks, seating, conference tables, storage and casegoods. Crews inventory and tag the furniture, take it down, move it, and reinstall it to the plan for the new space. Electrical reconnection is handled by a licensed electrician and quoted as a separate line.

What happens to furniture that does not fit the new office?

It is cleared from the old space as part of the same project. Each piece is routed case by case to resale, donation or recycling, and you receive an itemized inventory of what left. Deciding this early means crews only move furniture that has a place in the new plan, which saves time on move day.

Can you fill gaps in the new office with matching furniture?

Yes. Missing stations, chairs or storage can be added in pre-owned, remanufactured or new grades. Liquidation-grade furniture in stock can be installed in as little as 72 hours, remanufactured usually takes 7 to 14 days and new takes 4 to 6 weeks, so order gap-fill pieces early enough to land on move week.

How far ahead should we plan a Phoenix office move?

Start furniture planning about 90 days before the move date. That leaves time for the walkthrough, the space plan for the new suite, decisions on what moves and what goes, building paperwork at both addresses and any new or remanufactured pieces. Shorter timelines are possible with night and weekend crews, so share your date as early as you can.

Can the move happen over a weekend?

Often, yes. Many Phoenix moves are scheduled so the team leaves on a Friday and starts work in the new suite on Monday. That depends on the station count, freight elevator access at both buildings and how much reconfiguration the new plan needs. Larger offices are usually moved in phases over more than one weekend.

Is it worth moving old cubicles to a new office?

Sometimes. Moving makes sense when the system is in good condition, fits the new floor plate and suits the new layout. When stations are the wrong size or the system is discontinued, clearing it and furnishing the new suite with matched pre-owned furniture may be simpler. Both can be quoted against the same space plan before you decide.

Rows of office seating
Start here

Moving out, downsizing or consolidating?

Every office is different. After a free walkthrough we recommend the best route for your furniture, case by case, and clear on your lease deadline.