Photo: DPPed, CC BY-SA 3.0, via Wikimedia Commons
Short answer: Office Station supplies remanufactured cubicles and modular office furniture to Phoenix businesses. These are name-brand panel systems rebuilt with new fabric, refinished frames and new worksurfaces, in the sizes and colors you pick. Remanufactured stations usually take 7 to 14 days, and every project is quoted individually with free space planning.
- What remanufactured means
- Remanufactured, refurbished, used and new
- How a remanufactured order runs
- Panel systems we rebuild
- Planning a Phoenix install
What remanufactured means
Commercial panel systems are built around steel frames and connectors designed to be taken down and put back up many times. The parts that wear out are the parts people see: fabric that fades or stains, paint that chips, laminate edges that lift, and keyboard trays and pedestals that take daily abuse. Remanufacturing replaces or restores exactly those parts.
A remanufactured station is not a used station with a quick wipe-down. Panels are stripped to the frame and re-covered. Frames, trim and end caps are refinished. Worksurfaces are replaced or resurfaced, and edge banding is redone. Pedestals, locks and drawer slides are checked, and the in-panel power is inspected before it goes back into service. You pick the fabric, the paint and the laminate, so the floor looks designed rather than collected.
Remanufactured, refurbished, used and new
The words get used loosely in this industry. Here is how Office Station uses them on a quote.
| Grade | What is done | Finishes | Typical timing |
|---|---|---|---|
| Used (liquidation grade) | Inspected, cleaned and graded as it came off a corporate floor | As found; matched sets where available | In stock, installed in as little as 72 hours |
| Refurbished | Cleaned and refreshed: worn pieces replaced, panels cleaned or re-skinned where needed | Mostly as found, some refresh | Quoted per project |
| Remanufactured | Stripped and rebuilt: new fabric, refinished frames, new or resurfaced worksurfaces | Your choice of fabric, paint and laminate | Usually 7 to 14 days |
| New | Ordered from the manufacturer line | Full catalog | 4 to 6 weeks |
The full comparison, including when each grade makes sense, is in the used vs remanufactured vs new cubicles guide. If you are refreshing cubicles you already own, see refurbished cubicles in Phoenix.
How a remanufactured order runs
- Free space plan. Send a floor plan, a CAD file or even a phone photo with rough dimensions. The planner lays out stations to your headcount and shows options for size and panel height. You can also pick a starting point on the cubicle configurations page.
- Finish selection. Choose panel fabric, frame and trim paint, and worksurface laminate. Glass or acrylic stackers can be added where you want daylight across the floor.
- Written quote. Furniture, delivery, installation and electrical appear as separate lines, so you can see what each part of the project costs.
- Rebuild. Panels and worksurfaces are produced to your sizes and finishes, usually in 7 to 14 days.
- Delivery and installation. Crews work around your building's elevator reservations, dock times and after-hours rules, and any hardwired power connection is quoted as its own line and coordinated with your building.
Want to see it first? The 3D station builder lets you try sizes, panel heights and colors before you ask for a quote.
Panel systems we rebuild
Remanufactured work is based on the major commercial panel lines, because their frames and connectors are made to be rebuilt and parts are widely available.
| Original manufacturer | Systems often rebuilt | Good fit for |
|---|---|---|
| Herman Miller | Ethospace, Action Office, Canvas | Tile-based panels, mixed heights, glass |
| Steelcase | Answer, Avenir, Montage | Large open floors, powered runs |
| Haworth | Unigroup, Premise, Compose | Flexible layouts, frequent reconfiguration |
| Knoll | Dividends, Morrison, Reff | Clean lines, lower and mid-height panels |
| Teknion and Allsteel | Leverage, Terrace and similar lines | Matching an existing floor |
Brand and system names identify the original manufacturer only. Office Station is an independent reseller, not an authorized dealer, and manufacturer warranties generally do not transfer. Brand-by-brand details are in the Steelcase and Herman Miller cubicle guides.
Planning a Phoenix install
Heat and delivery timing
From May through September, laminate, adhesives and fabric should not sit in a closed truck through an afternoon. Phoenix deliveries in summer are booked for early morning, and the suite's air conditioning should be running on install day. New build-outs sometimes have power before they have cooling, so confirm it with building management.
Power and data
Powered panels need a feed from the building. Plan where the base feeds land before the layout is final, and confirm whether your landlord's electrician or ours makes the connection. The powered cubicles guide explains circuits and cable paths in plain terms.
Panel height
Lower panels open up sightlines and daylight; taller panels give more privacy and acoustic separation. Many Phoenix floors mix the two: low panels along the windows, taller panels by circulation paths and call-heavy teams. See cubicle panel heights for how to choose.
Across the Valley
Remanufactured stations are installed throughout Greater Phoenix, including Scottsdale, Tempe, Mesa, Chandler, Gilbert, Glendale and Peoria, plus the West Valley and East Valley growth corridors. Need furniture this week instead? Start with used office cubicles in Phoenix.
Space planning is free. Send your floor plan, headcount and move date to hello@officestation.com or request a quote, and you will get a layout and a written quote for remanufactured stations in your colors.
Frequently asked questions
What is a remanufactured cubicle?
A remanufactured cubicle is a name-brand panel system that has been taken apart, inspected and rebuilt before sale. Panels are stripped and re-covered in new fabric, frames and trim are refinished, worksurfaces are replaced or resurfaced, and hardware and power components are checked or swapped. The result looks and works close to new, in the colors and sizes you choose.
How long do remanufactured cubicles take in Phoenix?
Remanufactured workstations usually take 7 to 14 days from an approved layout and finish selection. That covers rebuilding the panels and worksurfaces to your sizes and colors. Installation is then scheduled around your building's elevator and dock rules. If you need furniture sooner, liquidation-grade stations in stock can be installed in as little as 72 hours.
Is remanufactured office furniture as good as new?
For most offices it performs the same day to day, because the core of a commercial panel system, the steel frame and connectors, is built to outlast several leases. What changes is everything you see and touch: fabric, paint, worksurfaces and trim. Manufacturer warranties generally do not transfer, so ask about the condition and the work done on your order.
Which brands of remanufactured cubicles can I get in Phoenix?
Office Station quotes remanufactured systems based on Steelcase, Herman Miller, Haworth, Knoll, Teknion and Allsteel panel lines, subject to what is available in the sizes you need. Brand names identify the original manufacturer only: Office Station is an independent reseller, not an authorized dealer of any manufacturer.
Can I choose my own fabric and finish colors?
Yes. Choosing finishes is one of the main reasons companies pick remanufactured over used. Panel fabric, frame and trim paint, and worksurface laminate are selected for your order, so a whole floor matches your brand. Send a logo or a photo of the space and the space planner will suggest combinations with the layout.
How much do remanufactured cubicles cost in Phoenix?
Every project is quoted individually. Station size, panel height, power, finishes, quantity, delivery and building access all shape the number, and remanufactured costs well below comparable new. Request a free space plan and quote with your headcount and floor plan, and you receive a written quote with installation and electrical shown as separate lines.
