Steelcase Phoenix

Steelcase Furniture in Phoenix, AZ

How Phoenix offices buy pre-owned and remanufactured Steelcase cubicle systems and chairs, which system fits which floor, and what to check before approving a quote.

8 minute read
Steelcase Furniture in Phoenix, AZ

Photo: DPPed, CC BY-SA 3.0, via Wikimedia Commons

Short answer: Office Station supplies used and remanufactured Steelcase furniture to offices across Greater Phoenix: Answer, Avenir and Montage cubicle systems, plus Leap V1, Leap V2, Gesture, Series 1, Series 2 and Amia task chairs. In-stock liquidation-grade pieces can be installed in as little as 72 hours, and remanufactured Steelcase usually takes 7 to 14 days. Office Station is an independent reseller, not an authorized Steelcase dealer, and manufacturer warranties generally do not transfer to pre-owned furniture. Every project is quoted individually, and space planning is free.

What Steelcase furniture you can buy in Phoenix

Steelcase systems furnished a large share of Valley corporate floors: insurance and banking operations in Tempe and Chandler, call centers in Deer Valley and the West Valley, and professional offices along the Camelback Corridor. When those companies consolidate or relocate, the furniture comes back out of the building, and that is where matched pre-owned Steelcase runs come from.

A Phoenix Steelcase order usually covers one or both of these:

  • Cubicle and workstation systems. Answer, Avenir and Montage, in panel heights of 39, 47, 53 and 67 inch, powered or non-powered, with matching pedestals, overheads and worksurfaces.
  • Task chairs. Leap V1, Leap V2, Gesture, Series 1, Series 2 and Amia, photographed in black, with other finishes sourced on request. Every chair quotes two ways: remanufactured or pre-owned.

The national catalog is on used Steelcase furniture. This page covers the Phoenix side: which system suits which floor, how to add to Steelcase you already own, and how delivery works in Valley buildings. Furnishing a full suite across several brands? Start at office furniture in Phoenix.

Answer, Avenir and Montage compared

All three are Steelcase panel systems, but they are built for different jobs. Choose by how dense the floor is, how much power each station needs and how finished the space has to look.

SystemHow it is builtLook on the floorBest fit in a Phoenix office
AnswerFull-featured panels with power and data routing, stackable heights and hang-on componentsSubstantial, classic workstation rowsDense operations, claims, dispatch and call-center floors that need many powered stations
AvenirSimpler, lighter panels with fewer parts per stationClean and straightforwardSmall and mid-size offices, growth seats and back-office rows with simple layouts
MontageSlimmer panels with tile options for a lighter profileMore architectural, lighter scaleClient-facing floors in Scottsdale, Biltmore or Kierland where appearance matters

What that means in practice:

  • Answer is the volume workhorse. If you need 80 matched, powered stations for a Deer Valley or Chandler operations floor, it is usually the first system to check.
  • Avenir keeps simple layouts simple. Fewer components per station can make planning and installation more direct.
  • Montage suits floors with visitors. The slimmer profile and tile options give a more finished look without moving to open benching.

If your team does not need panels at all, compare benching desks in Phoenix. For sizes, connectors and what to inspect on used Steelcase stations, read the used Steelcase cubicles guide. Every brand and layout in the Valley is on office cubicles in Phoenix.

Steelcase chairs: Leap, Gesture, Series and Amia

Six Steelcase task chairs are in the regular seating lineup. Most Phoenix offices pick one model for the team and a second for executives, long-shift staff or conference rooms.

ChairWhat it is known forGood fit
Leap V1The original Leap, with a flexing back and a wide range of adjustmentMatching existing Leap chairs already on your floor
Leap V2The later Leap, with refined controls and updated stylingAll-day task seating for new rollouts
GestureArms that move through a wide range to support phones, tablets and keyboardsDevice-heavy roles, analysts, people who shift posture often
Series 1Simple, lighter chair with essential adjustmentsLarge rollouts, training rooms and shared stations
Series 2Flexible back with a breathable knit optionTeams that want more back flex than Series 1
AmiaUpholstered back with adjustable lumbar supportPrivate offices and users who prefer a cushioned back

Valley offices that run warm in the afternoon often lean toward knit or mesh backs because air moves through them, while upholstered backs like Amia suit private offices with good cooling. Model details and grades for every Steelcase chair are on used Steelcase chairs.

Pre-owned or remanufactured Steelcase

Every Steelcase piece is available on one of two pre-owned paths. Lead time and who sees the room usually decide it.

Pre-owned (liquidation grade)Remanufactured
Lead timeIn stock, installed in as little as 72 hoursUsually 7 to 14 days
ConditionAs it came off a corporate floor, inspected and graded A like new, B very good or C goodRebuilt with new fabric, refinished frames and replaced worn parts
FinishesThe original owner's fabric and laminateYour fabric, paint and laminate choices
Best forLeases that start soon, operations rows, overflow and training roomsClient-facing floors that need one consistent, refreshed look

Pre-owned Steelcase costs well below new, and many Phoenix offices mix both on one order: remanufactured Montage near reception and liquidation-grade Answer in the operations rows behind it. For how rebuilt stations are made, see remanufactured cubicles in Phoenix. If the system you want is not available in your count, a new workstation line takes 4 to 6 weeks and is quoted the same way.

Adding to a Steelcase floor you already have

A lot of Phoenix requests start with "we already have Steelcase and need more." Adding stations works best when the first email includes the right details.

  1. Name the system if you can. A label on the underside of a worksurface, the original install drawings or photos of a panel end and connector usually identify it.
  2. Measure panel heights. Standard heights are 39, 47, 53 and 67 inch, and a "low panel" usually means 47 inch.
  3. Photograph fabric, trim and laminate. An exact fabric match from pre-owned stock is uncommon. Remanufactured panels in a coordinating fabric often look cleaner than a near match.
  4. Note the power. Which panels carry power, and where the feed enters each run. A licensed electrician connects powered panels after installation, quoted as its own line.
  5. Do not assume cross-brand fit. Steelcase panels generally do not connect to other manufacturers' systems, and not every Steelcase system connects to every other. Confirm before ordering.

With photos and a floor plan, the free space plan shows exactly where new stations join existing runs.

Independent reseller and warranties

Office Station is an independent reseller, not an authorized dealer of Steelcase or any other manufacturer. The Steelcase name and model names identify the original manufacturer only. For a Phoenix buyer, that comes down to three points:

  • Warranties generally do not transfer. Manufacturer warranties usually cover the original purchaser, so they generally do not follow pre-owned furniture.
  • Every pre-owned line is graded. The quote names the product, size and condition grade, so you know what you are approving.
  • Look before you approve. Ask for photos of specific pieces or fabric samples for remanufactured stations.

Need new Steelcase with a factory warranty? Buy through the manufacturer's dealer network. Need proven Steelcase furniture on a tighter schedule and budget? That is what pre-owned and remanufactured are for. Comparing brands? See Herman Miller furniture in Phoenix.

Phoenix buildings and delivery timing

Office Station is based in Peoria and delivers across Greater Phoenix, along I-10, I-17, SR 51, US 60 and the Loop 101, 202 and 303. In most projects, the building sets the schedule more than the furniture does.

  • Downtown and Midtown towers on Central Avenue reserve docks and freight elevators by the hour, and light rail limits where trucks can stop.
  • Camelback Corridor and Biltmore buildings usually ask for specific certificate of insurance wording and after-hours windows.
  • Office parks in Chandler, Tempe and the Scottsdale Airpark often have no dock, so trucks unload by liftgate, and some parks set rules on truck hours and lot parking.
  • Large operations floors off I-17 in Deer Valley or the Price Corridor in Chandler often need weekend or night installs so a team can keep working during the week.

From May through September, deliveries are booked for early morning so chairs, laminate and panels do not sit in a hot truck or on an open dock. Summer monsoon storms can bring afternoon dust and rain, another reason to unload early. Ask building management to have the suite's air conditioning on for delivery day, since a new build-out sometimes has power before it has cooling.

What shapes a Steelcase quote

Every project is quoted individually. These are the things that move it:

  • Grade. Pre-owned or remanufactured, and the condition grade of pre-owned pieces.
  • System and station size. An Answer station with full power is a different build from a simple Avenir station.
  • Panel height. Taller panels use more material.
  • Power and electrical. Powered panels and the electrician's connection, as separate lines.
  • Matched quantities and finishes. Large counts in one fabric narrow the search.
  • Delivery, building access and installation. Address, dock or liftgate, elevator size, after-hours rules and complexity.

The same layout can be quoted in more than one grade so you can compare. To get started, request a quote with your headcount and address.

Space planning is free. Send your floor plan or a few photos, headcount, move-in date and any details on Steelcase you already own to hello@officestation.com, or call 602-703-4000, and the free space plan comes back with your quote.

Frequently asked questions

Where can I buy used Steelcase furniture in Phoenix?

Office Station supplies pre-owned and remanufactured Steelcase furniture across Greater Phoenix, including Answer, Avenir and Montage cubicle systems and Leap V1, Leap V2, Gesture, Series 1, Series 2 and Amia chairs. It is an independent reseller, not an authorized Steelcase dealer. Email your headcount, address and a floor plan to hello@officestation.com for a free space plan and a written quote.

Is Office Station an authorized Steelcase dealer?

No. Office Station is an independent reseller of pre-owned and remanufactured corporate office furniture. The Steelcase name identifies the original manufacturer of the product only. Furniture comes from corporate office liquidations and decommissioning projects and is inspected and graded before sale. If you need new Steelcase product with a factory warranty, buy it through the manufacturer's dealer network.

Do used Steelcase chairs and cubicles keep their warranty?

Generally no. Manufacturer warranties generally do not transfer to pre-owned furniture, because they usually cover the original buyer. Each pre-owned line on an Office Station quote carries a condition grade instead: A like new, B very good or C good. Ask for photos of the specific pieces proposed, and review the grades before you approve the order.

What is the difference between Steelcase Answer, Avenir and Montage?

Answer is a full-featured panel system built for dense, powered rows and is common in volume. Avenir is a simpler, lighter panel system that suits straightforward layouts and smaller teams. Montage is a slimmer, more architectural system with tile options for floors that want a lighter look. A free space plan shows how each one fits your suite.

Should I buy a Steelcase Leap V1 or Leap V2?

Both are strong all-day task chairs. The Leap V2 is the later version, with refined controls and a slightly updated design, and it is the more common choice for new rollouts. The Leap V1 can make sense when you are matching chairs already on your floor. Each model is quoted remanufactured or pre-owned, so compare both before deciding.

How fast can used Steelcase cubicles be installed in Phoenix?

In-stock liquidation-grade Steelcase cubicles can be installed in as little as 72 hours, depending on quantity and building access. Remanufactured Steelcase workstations, rebuilt with new fabric and refinished parts, usually take 7 to 14 days. Confirm stock for your exact count before committing to a move-in date with your landlord or your team.

Rows of office seating
Start here

Ready to furnish the space?

Pre-owned designer furniture, quoted to your project, with free space planning.