Open plan benching

Benching Desks in Phoenix, AZ

Benching workstations for Phoenix open-plan offices, planned by seat count with privacy screens, power and sit-stand options, in pre-owned, remanufactured or new.

8 minute read
Benching Desks in Phoenix, AZ

Photo: DPPed, CC BY-SA 3.0, via Wikimedia Commons

Short answer: Office Station supplies benching desks to Phoenix-area offices: shared-frame workstations for open plans, planned by seat count, with desk-mounted privacy screens, beam power and fixed or sit-stand worksurfaces. Benching comes pre-owned (liquidation grade), remanufactured or new: in-stock liquidation grade can be installed in as little as 72 hours, remanufactured usually takes 7 to 14 days and new takes 4 to 6 weeks. Space planning is free and every project is quoted individually.

What benching is and who it suits

Benching replaces individual panel stations with long, shared desks. A run of four, six or eight seats sits on one frame, usually with a center beam that carries power and cables. Seats face each other across a low screen, or sit side by side along a wall. There are no full-height panels, so the floor stays open and light reaches deeper into the suite.

It suits teams that work together all day: software and product groups, marketing, project teams, sales floors with short calls, and hoteling areas where people sit wherever there is space. It suits growth, too, because adding a seat to a run is simpler than adding a cubicle. It is a weaker fit for long phone calls, confidential work and roles that need a lot of storage at the desk.

For a national overview of brands and benching types, see benching systems. To plan a run by seat count and compare grades, see used benching systems. This page covers buying and installing benching in the Phoenix area.

Benching vs cubicles

The choice comes down to how your team works, not which looks more modern. The table sets out the practical differences.

FactorBenchingPanel cubicles
Seats in a given floor areaMore, because there are no panels and shared aisles serve both sidesFewer, because each station has its own footprint and panel thickness
Visual privacyLow desk screens onlyPanels at 47, 53 or 67 inches, plus optional glass toppers
SoundOpen; relies on screens, ceiling and carpet to absorb noiseFabric panels absorb more sound at each seat
Storage at the deskMobile pedestals or shared storage at the ends of runsPedestals, overhead bins and shelves hung on the panels
PowerShared beam fed from one point per runPowered panel base, fed per cluster
Reconfiguring laterAdd or remove seats along a runMore parts to break down and rebuild
Best forCollaborative teams, hoteling, fast-growing groupsCall work, finance, HR, focused roles

Many Valley offices combine both. Benching takes the center of the floor, panel stations line one side for heads-down roles, and a few small enclosed rooms handle calls and one-on-ones. For panel stations, sizes and panel heights, see office cubicles in Phoenix.

Benching layouts and seat counts

Benching is ordered in runs. The common building blocks are:

  • Two-seat face-to-face. The smallest unit, good for small teams and filling odd corners.
  • Four, six and eight-seat runs. The workhorse of an open floor. Longer runs save frame and power feeds but make it harder for people in the middle to get out.
  • Single-sided runs. Seats on one side, facing a wall or window, where the room is too narrow for facing seats.
  • Linked runs. Several runs connected end to end, often with storage or a low cabinet at each break to create walk-through points.

Worksurfaces are typically 24 or 30 inches deep and 48 to 72 inches wide per seat. A 30 inch depth suits two monitors; a 60 inch width gives most people enough elbow room without wasting floor area. Leave enough space behind each chair for people to push back and walk past. The cubicle configurations page shows benching beside single, cluster and bullpen layouts so you can compare footprints.

Sit-stand benching

Each seat can have its own electric lift, so neighbors work at different heights. Cable management matters more here, because cords have to travel from a moving top to a fixed beam. Height-adjustable options and cable details are covered on standing desks in Phoenix. Office Station's own new line, the OS Power Wall, is a freestanding power and data beam with privacy screens and sit-stand desks on both sides.

Privacy screens and acoustics

Screens do most of the work that panels do in a cubicle, at a fraction of the height. They mount to the worksurface or the beam between facing seats, and sometimes at the ends of runs or along the aisle side.

Screen materialPrivacySoundNotes
Fabric-wrappedGoodAbsorbs some soundCan usually be reupholstered to match new fabrics
PET feltGoodAbsorbs some soundLightweight, wipeable, often made with recycled content
Frosted acrylic or glassModerateReflects soundLets light through and hides screens from across the desk
Clear acrylic or glassLowReflects soundKeeps sight lines open; mainly a spatial divider

Screen height is a trade-off. A taller screen blocks the view of the person opposite and some of their voice, but it starts to feel like a cubicle and blocks light. A lower screen keeps the room open. In open Phoenix suites with high exposed ceilings and polished concrete, which are common in converted spaces in Downtown, Tempe and Roosevelt Row, fabric or felt screens help noticeably because the room itself absorbs very little sound.

Power, data and the feed point

A benching run is only as good as its power. Most systems carry receptacles and cable space in a beam or raceway under the worksurface, fed from one point per run.

  • Wall feed. The run starts at a wall and plugs or hardwires into an outlet there. Simplest, but it ties the layout to the wall.
  • Power pole. A pole drops from the ceiling to the run. Works anywhere on the floor, at the cost of a visible pole.
  • Floor box. Power comes up through the slab under the beam. Cleanest look. Coring a concrete slab usually requires scanning first and landlord approval, so it needs planning time.

Hardwired feeds and floor work are done by a licensed electrician after installation and quoted as a separate line. Data cabling is usually run by your IT or low-voltage vendor through the same beam. The free office space planning marks each feed point on the plan before you commit to a layout.

Grades and lead times

Benching comes in the same three grades as the rest of the range. Pre-owned costs well below new, and many projects mix grades.

GradeLead timeConditionBest fit
Liquidation grade (used)Installed in as little as 72 hours when in stockAs removed from a corporate floor, graded A like new, B very good or C goodFast openings, overflow and project rooms
RemanufacturedUsually 7 to 14 daysFrames refinished, new tops and screens in your colorsA client-facing open floor in one consistent finish
New4 to 6 weeksOrdered to your sizes, screens and finishesExact run lengths, sit-stand at every seat, brand standards

Matched counts are the main constraint for pre-owned benching. Forty identical seats in one finish depends on what has come off Valley floors recently, so give your full count up front. Office Station is an independent reseller, not an authorized dealer of any manufacturer. Brand names identify the original manufacturer only, and manufacturer warranties generally do not transfer to pre-owned furniture.

Benching in Phoenix buildings

Open-plan benching is common in the Valley's newer and converted office space: Tempe Town Lake and the Rio Salado corridor, Downtown Phoenix and the Warehouse District, Chandler's Price Road corridor along the Loop 101, and Scottsdale's tech and finance suites along the Loop 101 near Kierland and the Airpark. Office Station is based in Peoria and installs across all of Greater Phoenix, from the I-10 West Valley to the US 60 East Valley.

  • Towers. Dock times, freight elevator reservations and certificate of insurance wording must be confirmed before the truck is booked. Long beams and tops need to fit the elevator, so share its interior dimensions.
  • Business parks and airparks. Many single-story suites have no dock. Benching comes off a liftgate in the lot, and some parks limit truck hours.
  • Summer heat and monsoon. From May through September, deliveries are booked for early morning so laminate and edge banding are not left in a hot truck. Monsoon storms tend to build in the afternoon, another reason to unload early. Ask for the suite's air conditioning to be running on install day.

Installation crews build each run, level the frames, mount screens, connect beam power for the electrician and route cables. Details are on office furniture installation in Phoenix. Seating for the new floor is covered on office chairs in Phoenix.

Space planning is free. Send your seat count, address, move-in date and a floor plan to hello@officestation.com or call 602-703-4000, or request a quote, and the plan comes back with benching runs, feed points and a written quote.

Frequently asked questions

What is a benching workstation?

A benching workstation is a run of desks that share a common frame or beam instead of separate panels. Seats face each other or sit side by side, with low desk-mounted screens between them and power running through the shared beam. Benching seats more people in the same floor area than panel cubicles and suits open plans, hoteling and teams that collaborate constantly.

Where can I buy office benching desks in Phoenix?

Office Station supplies benching to offices across Greater Phoenix in three grades: liquidation-grade pre-owned, remanufactured and new. Projects are planned by seat count to your floor plan, then delivered and installed by one crew. Email headcount, address, move-in date and a floor plan to hello@officestation.com for a free space plan and a written quote.

Benching or cubicles: which is better for my office?

Benching fits more seats, keeps sight lines open and suits teams that talk all day. Cubicles give more acoustic and visual privacy and more storage at each seat, which suits call work, finance and focused tasks. Many Phoenix offices use both: benching for collaborative teams, panel stations for heads-down roles, and a few enclosed rooms for calls.

How do benching desks get power?

Most benching carries power and data through a shared beam or raceway under the worksurface. The run is fed from a wall outlet at the end, a power pole from the ceiling, or a floor box under the beam. Hardwired feeds are connected by a licensed electrician after installation and quoted as a separate line. Plan the feed point before choosing the layout.

How fast can benching be installed in Phoenix?

In-stock liquidation-grade benching can be installed in as little as 72 hours, depending on quantity and building access. Remanufactured benching usually takes 7 to 14 days, and new benching takes 4 to 6 weeks. Large matched counts are the main constraint for pre-owned, so give the full seat count when you ask for availability.

Can benching desks have privacy screens?

Yes. Desk-mounted screens clip or bolt to the worksurface or beam, between facing seats and at the ends of runs. Common materials are fabric-wrapped, PET felt, acrylic and frosted or clear glass. Taller screens add privacy and some sound absorption; lower ones keep the room open. Screens can usually be added to pre-owned benching that arrived without them.

Rows of office seating
Start here

Ready to furnish the space?

Pre-owned designer furniture, quoted to your project, with free space planning.