Herman Miller Phoenix

Herman Miller Furniture in Phoenix, AZ

How Phoenix offices buy pre-owned and remanufactured Herman Miller cubicle systems and chairs, which product fits which job, and what to check before you approve a quote.

8 minute read
Herman Miller Furniture in Phoenix, AZ

Photo: DPPed, CC BY-SA 3.0, via Wikimedia Commons

Short answer: Office Station supplies used and remanufactured Herman Miller furniture to offices across Greater Phoenix: Action Office, Ethospace and Canvas cubicle systems, plus Aeron, Embody, Mirra 2, Celle and Sayl task chairs. In-stock liquidation-grade pieces can be installed in as little as 72 hours, and remanufactured Herman Miller usually takes 7 to 14 days. Office Station is an independent reseller, not an authorized Herman Miller dealer, and manufacturer warranties generally do not transfer to pre-owned furniture. Every project is quoted individually, and space planning is free.

What Herman Miller furniture you can buy in Phoenix

Herman Miller furniture has been specified in Valley corporate offices for decades, so a steady supply comes back out of Phoenix-area offices when companies consolidate, relocate or close a floor. That supply is what makes it practical to buy Herman Miller pre-owned in matched quantities here instead of piecing it together one listing at a time.

A typical Phoenix Herman Miller order falls into two groups:

  • Cubicle and workstation systems. Action Office, Ethospace and Canvas, in panel heights from 39 inch up to 67 inch, with or without powered panels, plus the matching pedestals, overhead storage and worksurfaces.
  • Task chairs. Aeron, Embody, Mirra 2, Celle and Sayl, photographed in black (Aeron in graphite), with other finishes sourced on request. Each chair quotes two ways: remanufactured or pre-owned.

The national catalog lives on used Herman Miller furniture. This page covers what changes when the furniture is going into a Phoenix-area suite: which system suits which kind of floor, how to match what you already own, and how delivery works in Valley buildings. If you are furnishing a whole office across several brands, start with office furniture in Phoenix instead.

Action Office, Ethospace and Canvas compared

All three are Herman Miller panel or frame systems, but they solve different problems. The right one depends on how private the work is, who sees the floor and whether you need to match furniture already in place.

SystemHow it is builtLook on the floorBest fit in a Phoenix office
Action OfficeHinged fabric panels with components that hang from slotted panel railsClassic, uniform cubicle rowsBack-office, claims, dispatch and call-center rows that need many matched stations and acoustic privacy
EthospaceA steel frame dressed with interchangeable tiles: fabric, tackboard, glass, markerboardMore architectural, mixed tile finishes at different heightsClient-facing floors on the Camelback Corridor or in Scottsdale where the space has to look finished
CanvasLower walls, spines and freestanding desking elementsOpen, light, team-orientedTech and creative teams in Tempe or Chandler who want shared tables, low screens and sit-stand desks

A few practical notes from the field:

  • Action Office is the easiest to find in volume. If you need 60 identical stations in one finish, it is usually the first system to check.
  • Ethospace rewards planning. Tiles can be specified at different heights on the same frame, such as fabric below the desk line and glass above it, so a space plan matters more than with simpler panels.
  • Canvas trades privacy for openness. It is a good fit for collaborative teams, less so for staff on the phone all day.

For a closer look at sizes, connectors and what to inspect, read the used Herman Miller cubicles guide. Every brand and layout is on office cubicles in Phoenix.

Herman Miller chairs for Valley offices

Five Herman Miller task chairs are in the regular seating lineup. Each suits a slightly different user and budget, and most Phoenix offices pick one primary model for the team and a second for executives or long-shift roles.

ChairWhat it is known forGood fit
AeronMesh seat and back, three sizes (A, B, C), adjustable lumbar or PostureFit back supportAll-day task seating, open plans, anyone who runs warm
EmbodyFlexible back with a pixelated support structure that follows the spineLong-shift roles, engineers, executives who sit for hours
Mirra 2Flexing polymer back, lighter frame, simple controlsTeams that want Herman Miller seating with fewer adjustments to learn
CelleCellular back and seat, straightforward and durableLarge rollouts, training rooms and shared stations
SaylSuspension back with a distinctive open frameCollaborative spaces, conference rooms and lighter task use

Mesh and suspension backs are popular in the Valley for a simple reason: air moves through them, and they do not hold heat the way a thick foam back can when an office runs warm in late afternoon. The Aeron has its own page, Aeron chairs in Phoenix, covering sizes, Remastered versus classic and buying in matched quantities. For every brand of seating, see office chairs in Phoenix.

Pre-owned or remanufactured Herman Miller

Every Herman Miller piece comes in one of two pre-owned paths. The right one depends on your move-in date and who will see the furniture.

Pre-owned (liquidation grade)Remanufactured
Lead timeIn stock, installed in as little as 72 hoursUsually 7 to 14 days
ConditionAs it came off a corporate floor, inspected and graded A like new, B very good or C goodRebuilt: new fabric, refinished frames, replaced worn parts and worksurfaces
Finish choiceThe finish the original owner choseYour fabric, paint and laminate choices
Best forA lease that starts soon, operations rows, overflow and training roomsClient-facing floors and offices that want a consistent, refreshed look

Pre-owned Herman Miller costs well below new, and mixing both paths on one order is common. A Phoenix suite might put remanufactured Ethospace in the area clients walk through and liquidation-grade Action Office in the rows behind it. For how rebuilt stations are made, see remanufactured cubicles in Phoenix.

If the Herman Miller system you want is not available in your count, a new workstation line is the fallback. New furniture takes 4 to 6 weeks, and it is quoted the same way: grade, size, finish and installation as separate lines.

Matching or adding to an existing Herman Miller floor

Many Phoenix requests are not a fresh office. They are a company that already has Herman Miller cubicles and needs ten more stations, taller panels for a new team, or a replacement run after a remodel. That is a matching problem, and it goes faster with good information up front.

  1. Identify the system. Action Office and Ethospace look different up close: Action Office panels are full fabric with slotted rails, while Ethospace shows a visible frame with separate tiles. Photos of a panel edge and a connector settle most questions.
  2. Measure the panel heights. Standard heights are 39, 47, 53 and 67 inch. A "low panel" usually means 47 inch.
  3. Photograph the fabric and trim. Exact fabric matches from pre-owned stock are uncommon. A coordinating fabric on remanufactured panels often looks more intentional than a near miss.
  4. Check power. Note whether existing panels carry power, and where the floor or wall feed enters each run. Powered panels need a licensed electrician after installation, quoted as its own line.
  5. Do not assume cross-brand fit. Herman Miller panels generally do not connect to other manufacturers' panels. Some components cross between Herman Miller systems, but confirm before you order.

Send the photos and measurements with your floor plan, and the free space plan will show where the new stations join the old ones.

Independent reseller, warranties and what that means

Office Station is an independent reseller, not an authorized dealer of Herman Miller or any other manufacturer. The Herman Miller name and model names identify the original manufacturer of the product, nothing more. In practice, that means three things for a Phoenix buyer:

  • Warranties generally do not transfer. Manufacturer warranties usually cover the original purchaser, so they generally do not follow pre-owned furniture to a new owner.
  • Condition grades replace guesswork. Every pre-owned line on the quote names the product and its grade, so you know what you are approving.
  • You can see before you approve. Ask for photos of the specific pieces proposed, or fabric samples for remanufactured stations.

If your company needs new Herman Miller product with a factory warranty, buy it through the manufacturer's dealer network. If you need proven Herman Miller furniture on a tighter schedule and budget, pre-owned and remanufactured are built for that.

Phoenix buildings, heat and delivery

Office Station is based in Peoria and delivers across Greater Phoenix, from the Loop 101 and Loop 303 corridors in the West Valley to Chandler and Gilbert off the Loop 202. The furniture is the easy part. The building usually sets the schedule.

  • Downtown and Midtown towers along Central Avenue book freight elevators and docks by the hour, and light rail limits curbside stops.
  • Camelback Corridor and Biltmore buildings often require specific certificate of insurance wording and after-hours install windows.
  • Scottsdale Airpark and Valley office parks often have no dock, so trucks unload by liftgate from the lot, and some parks have association rules on truck hours and parking.
  • Deer Valley and Tempe operations floors off I-17 and the Loop 202 tend to need high counts of matched, powered stations, which suits Action Office in volume.

From May through September, deliveries are booked for early morning so chairs, laminate and panels are not left sitting in a hot truck or on an open dock. Monsoon storms from summer into early fall can bring dust and sudden rain in the afternoon, which is another reason to unload early. Ask building management to have the suite's air conditioning running on delivery day. For scheduling details, see office furniture delivery in Phoenix.

What shapes a Herman Miller quote

Every project is quoted individually. These are the things that move the number:

  • Grade. Pre-owned or remanufactured, and the condition grade of pre-owned pieces.
  • System and station size. Ethospace with glass tiles is a different build from Action Office fabric panels.
  • Panel height. Taller panels use more material.
  • Power. Powered panels and the electrician's work, quoted as separate lines.
  • Matched quantities and finishes. Forty identical stations, or a specific fabric, narrow the search.
  • Delivery, access and installation. Address, dock or liftgate, elevator size, after-hours rules and installation complexity.

The same layout can be quoted in more than one grade so you can compare before you decide. To start, request a quote with your headcount and address.

Space planning is free. Send your floor plan or a few photos, headcount, move-in date and any existing Herman Miller details to hello@officestation.com, or call 602-703-4000, and the free space plan comes back with your quote.

Frequently asked questions

Where can I buy used Herman Miller furniture in Phoenix?

Office Station supplies pre-owned and remanufactured Herman Miller furniture to offices across Greater Phoenix, including Action Office, Ethospace and Canvas cubicle systems and Aeron, Embody, Mirra 2, Celle and Sayl chairs. It is an independent reseller, not an authorized Herman Miller dealer. Send your headcount, address and floor plan to hello@officestation.com for a free space plan and a written quote.

Is Office Station an authorized Herman Miller dealer?

No. Office Station is an independent reseller of pre-owned and remanufactured corporate furniture. The Herman Miller name identifies the original manufacturer of the product only. Furniture is sourced from corporate office liquidations and decommissioning projects, inspected and graded, then sold or rebuilt. Anyone who needs new Herman Miller product with a factory warranty should buy through the manufacturer's dealer network.

Does a used Herman Miller chair or cubicle come with the manufacturer warranty?

Generally not. Manufacturer warranties generally do not transfer to pre-owned furniture, because they usually cover the original purchaser. That is why every pre-owned line on an Office Station quote carries a condition grade: A like new, B very good or C good. Review the grades and ask for photos of anything you are unsure about before you approve the order.

Which Herman Miller cubicle system is best for a Phoenix office?

It depends on the floor. Action Office suits dense, private rows and is the easiest to find in matched quantities. Ethospace suits client-facing floors that want glass or tackboard tiles and a more finished look. Canvas suits open teams that want lower walls and desking. A free space plan shows how each one fits your suite before you choose.

How long does it take to get used Herman Miller furniture installed in Phoenix?

In-stock liquidation-grade Herman Miller furniture can be installed in as little as 72 hours, depending on the quantity and your building's access rules. Remanufactured Herman Miller workstations, rebuilt with new fabric and refinished parts, usually take 7 to 14 days. Confirm stock for your exact station count before you lock in a move-in date with your landlord.

Can you add stations to the Herman Miller cubicles we already have?

Often, yes. Send photos of your existing stations, the panel heights, the fabric and the label details if you can find them. Matching an existing Action Office or Ethospace floor depends on finding compatible panels, connectors and worksurfaces in a close finish. If an exact match is not available, remanufacturing new-to-you panels in a coordinating fabric is usually the cleanest answer.

Rows of office seating
Start here

Ready to furnish the space?

Pre-owned designer furniture, quoted to your project, with free space planning.