Moving an office across the Valley, from Scottsdale to Tempe, from downtown Phoenix to the Camelback Corridor, or from one Chandler building to another, is a short drive but a long list. The distance is small, so the hard parts are not freight. They are deciding what moves, getting two buildings to cooperate on the same days, handing IT a clean plan and surrendering the old suite on time. This checklist is written for a move inside the Phoenix metro. For a phased, general-purpose plan, see our corporate office relocation checklist.
- What is different about a move inside the Valley
- Inventory and tagging
- What moves and what gets liquidated
- Two buildings, one schedule
- Teardown, transport and reinstall
- IT and cabling handoff
- Timing and Phoenix summers
- Mistakes that slow local moves
- Surrendering the old suite
What is different about a move inside the Valley
On a long-distance move, transport is the main event. On a local move it is the shortest step. A truck can make several trips in a day, which changes the plan in useful ways:
- You can move in waves, a department or a floor at a time, rather than all at once.
- Leases often overlap for a short period, so the new suite can be set up before people arrive.
- Teardown at the old suite and install at the new one can run on the same nights with the same crew.
- The old space still has to be cleared and handed back, and that work is easy to underestimate when attention is on the new office.
The overlap is the key. If you have even a few weeks with both suites, use them: build out the new space first, move people second, clear the old space last.
Inventory and tagging
Start by counting what you own and marking where each item is going. Good tagging is what keeps a move from turning into a sorting exercise on the new floor.
- Walk every room. Count stations by size and type, chairs by model, files and storage, conference and break room furniture, and anything in storage closets.
- Record the product lines. Photograph labels under worksurfaces and on panel frames. You will need this to add stations later or to quote liquidation.
- Assign a destination. Every item gets one of three tags: move, liquidate or dispose. Use colored tags or labels that are easy to read from across a room.
- Number the moving items to the new plan. Each station or chair tagged to move should carry the room or station number it is going to on the new floor.
- List personal and IT items separately. Monitors, docks, phones and personal belongings move on their own track, usually packed by staff or IT.
What moves and what gets liquidated
The new floor plan decides most of this. Draw it first, then compare it to your inventory.
| Item | Usually moves when | Usually liquidated when |
|---|---|---|
| Cubicle workstations | They fit the new plan, are in good condition and can be added to | The new layout calls for different sizes or heights, or they are worn |
| Task chairs | They are quality ergonomic models in good repair | They are mixed, worn or low-grade |
| Private office furniture | Offices in the new space are a similar size | The new space has fewer or smaller offices |
| Conference tables | Rooms are similar and the table fits the elevator | Rooms change size, or the table is built in |
| Files and storage | Records are still kept on paper | Records have gone digital and storage needs have shrunk |
| Break room furniture | Style and size suit the new break area | The new space has its own or a different layout |
Systems furniture needs one more check: teardown and reinstall take real labor. If stations are old, worn or a poor fit for the new floor, liquidating them and adding pre-owned or remanufactured stations that fit can be the better path. Our Phoenix office furniture relocation page explains the moving side, and Phoenix office furniture liquidation covers what happens to what stays behind.
Two buildings, one schedule
A local move needs cooperation from two property managers. Get each building's rules in writing early:
- Freight elevator reservations and how many hours you can hold them
- Loading dock times, truck size limits and where trucks can wait
- Certificate of insurance requirements for every vendor on site
- Whether moves must happen after hours or on weekends
- Floor, wall and elevator protection requirements
- Parking and access badges for the crew
Month ends are busy at docks and elevators across the Valley because many leases start and end on the same days. Book early, and avoid planning the last move night on the final day of the old lease.
Teardown, transport and reinstall
Systems furniture moves in pieces. Each station is broken down to panels, worksurfaces, supports, storage and power parts, then rebuilt to the new plan.
At the old suite
- Staff pack personal items and clear worksurfaces before teardown night.
- IT disconnects and removes equipment first.
- Parts are labeled to their new station number and wrapped or carted by type.
- Hardware is bagged and kept with the parts it belongs to.
At the new suite
- The floor plan is marked on the floor before parts arrive.
- Electrical feeds are in place where panels or powered bases will land.
- Stations are rebuilt, leveled, powered and checked before staff arrive.
- Chairs and storage are placed to their tagged stations.
If you need added stations to fill the new plan, order them early. Liquidation-grade stock can be installed in as little as 72 hours, remanufactured usually takes 7 to 14 days, and new takes 4 to 6 weeks. For the full service, see corporate relocation.
IT and cabling handoff
The furniture plan and the network plan have to match. The cleanest moves treat the handoff as a checklist item with names on it.
- Send the approved floor plan to IT and the cabling contractor as soon as it is final.
- Confirm where data drops and power land at each station, including any that come through panels.
- Set the order on install night: electrical, then furniture, then IT connection and testing.
- Decide who removes abandoned cable at the old suite, if the lease requires it.
- Plan e-waste for retired computers, monitors and phones. Data-bearing devices need a documented wipe or destruction process. See our guide to office furniture disposal and e-waste.
Timing and Phoenix summers
Phoenix summers change how moves are run, not whether they can happen. Crews load early in the morning, in the evening or at night. Trucks stay at the dock for as short a time as possible. Finishes such as laminate, glass and upholstery are kept out of direct afternoon sun. Water and rest breaks are part of the schedule, not an afterthought.
Other timing points for a Valley move:
- Fiscal year ends and holidays crowd vendor calendars, so book early if your move falls near them.
- Monsoon storms can delay outdoor loading for an evening. Leave a spare night in the plan.
- Plan the first workday in the new office for midweek if you can, so issues are fixed before a full week starts.
Mistakes that slow local moves
Short moves invite short planning. These are the problems that show up most often when an office moves a few miles:
- Moving everything because it is close. A short drive does not make teardown and reinstall quick. Furniture that does not fit the new plan costs the same labor to move as furniture that does, and then it has to be cleared from the new space too.
- Drawing the new plan around the old furniture. Start from how the team will work in the new space, then see what you own that fits.
- Leaving the old suite for last. When the old space is the final task, it is the one that runs out of time. Book its clear-out on the same calendar as the move.
- One move night for everything. If the leases overlap, use waves. A single night leaves no room for a late truck or a stuck elevator.
- No one owns the handoffs. Furniture, electrical, IT and both property managers each need a named contact and a single shared schedule.
Surrendering the old suite
The move is not finished until the landlord accepts the old space. Read the surrender section of your lease and find out what condition the suite must be returned in. Most leases ask for an empty, broom-swept space. Some also require removing cabling, signage, added walls or other improvements.
- Clear everything tagged liquidate or dispose after the moving items have left.
- Handle e-waste and records with documented chain of custody.
- Patch, sweep and photograph each room.
- Walk the space with the property manager before the surrender date.
- Return keys, badges and access cards, and get written acceptance.
Our Phoenix office decommissioning service handles the clear-out side, and the broom-swept move-out checklist covers the handback room by room.
Space planning for the new suite is free. To plan the move and the clear-out together, contact us or write to hello@officestation.com with both addresses, your move window and a rough station count. Every project is quoted individually.
Frequently asked questions
How far ahead should we plan an office move within Phoenix?
Start furniture planning as soon as the new lease is signed, ideally three months or more before move day. Inventory and keep-or-clear decisions take a few weeks, and the new floor plan drives everything after that. If you need added stations, remember lead times: liquidation grade in as little as 72 hours, remanufactured usually 7 to 14 days, and new 4 to 6 weeks.
Should we move our old cubicles or buy different ones for the new office?
Move them when they fit the new floor plan, are in good condition and come from a line you can still add to. Leave them when they do not fit the new layout, are worn, or would cost more to tear down and reinstall than the space is worth. Many moves do both: the best stations move and the rest are liquidated.
Who handles network cabling during an office relocation?
Usually your IT team or a low-voltage cabling contractor, not the furniture installer. The furniture plan should go to the cabling contractor early so drops land where stations will sit. Agree in writing who disconnects equipment at the old suite, who reconnects at the new one, and who removes abandoned cable if your lease requires it.
Is it a bad idea to move offices in Phoenix in the summer?
Not a bad idea, but it needs more planning. Summer heat makes long midday loading hard on crews and on finishes, so moves are often scheduled for early mornings, evenings and weekends. Building docks and freight elevators book up near month ends year round, so reserve them early whatever the season.
What happens to the old office after we move out?
Your lease decides. Most leases require the space to be returned empty and broom-swept, and some require removing cabling, signage or tenant improvements. Anything left behind can lead to deposit deductions or holdover charges. Plan the clear-out of what is not moving and book a walkthrough with the landlord before the surrender date.
