Consolidation

Office Consolidation in Phoenix: Merging Locations and Giving Back Space

How to combine two Valley offices into one, or hand back part of a floor, while keeping the right furniture and clearing the rest on schedule.

9 minute read  ·  Updated September 2026

Consolidation is what happens when a company has more office than it needs in the wrong shape: two Valley locations that could be one, a full floor where half would do, or a satellite office that no longer earns its lease. The goal is to end up in less space that works better, with the right furniture in it, and to hand back the rest on time. This guide covers the two most common Phoenix cases, merging two locations and giving back part of a floor, and the furniture decisions that sit inside both. If your change is mainly about hybrid attendance across floors in one building, our guide to hybrid office consolidation goes deeper on peak-day sizing.

Two kinds of consolidation

Merging two locations. A company with offices in, say, Scottsdale and Tempe decides one is enough. One team moves into the other site, the second lease is ended or subleased, and that suite has to be emptied and returned. This is a relocation and a decommissioning at the same time.

Giving back part of a floor. A company stays in its building but returns some of its space to the landlord, or gives up one floor of several. Everyone stays at the same address, but furniture has to come out of the returned area while the rest of the office keeps working.

Both need the same three decisions: which space to keep, which furniture to keep, and how to clear the rest without disrupting the people who stay.

Choosing what space to keep

Your broker will lead on lease terms. The furniture and layout questions sit alongside them and can change the answer.

QuestionMerging two locationsGiving back part of a floor
Does the kept space fit the combined team?Test the busiest day at the kept site, not total headcountTest whether the remaining area holds everyone after the cut
What construction is needed?Usually layout changes onlyOften a demising wall, separate corridor access and divided building systems
Where is the better furniture?Compare both sites; the best pieces may be at the site you leavePieces in the returned area may be newer than those you keep
What must be returned?The whole suite, to the lease's surrender standardThe returned area, to whatever condition the amendment sets
Who is disrupted?The team that moves, plus clearing an empty suiteEveryone on the floor while the cut line is built and cleared

Draw the kept space at the new seat target before deciding anything about furniture. Space planning is free and drawn on your actual floor.

Keep or clear: the furniture decisions

Once the kept space is drawn, every item in both places falls into one of four groups.

  • Keep in place. Furniture already in the kept space that fits the plan and is in good shape.
  • Move in. Better or needed pieces from the space you are leaving. Chairs, conference furniture and storage often move; workstations move when they match the system in the kept space.
  • Swap. Worn parts in the kept space replaced with better matching parts from the space you leave, such as worksurfaces, pedestals or panel fabric from the same line.
  • Clear. Everything else, routed to resale, donation, recycling or disposal.

The swap group is where consolidations save the most hassle. If both locations use the same manufacturer and product line, the kept space can come out looking better than before. If they use different lines, workstations from the two sites usually cannot be mixed in one run, so pick the better system and clear the other.

Office Station is an independent reseller, and what happens to cleared furniture depends on brand, age, condition, quantity, timing and building access. It is decided case by case after a walkthrough. See Phoenix office furniture liquidation for how that works.

Sublease timing and furniture

When the space you are leaving still has lease term left, subleasing is often on the table. Furniture affects that in two directions.

Furnished space can be easier to sublease, especially to smaller companies that want to move in quickly. But leaving furniture in place ties it to a deal that may not happen. Set the rules with your broker:

  • Decide early whether to market the space furnished. If so, keep a complete, matching set in place and move only what the kept space truly needs.
  • Set a cutoff date. If no sublease is signed by then, clear the space while there is still time before the lease ends.
  • Put furniture terms in writing. A sublease that includes furniture should say who owns it, who maintains it and what happens to it when the sublease ends.
  • Plan for the end of the sublease too. Furniture left with a subtenant may come back to you to clear at the end of the master lease.

Partial clear-outs

Giving back part of a floor almost always means a partial clear-out: some furniture leaves while people work a few feet away. It is a different job from clearing an empty suite.

Mark the line

Tag every item in the returned area clearly, and mark the boundary on the floor. Anything that crosses the line, such as a run of stations or a powered panel spine, needs a plan for where it is cut and how the remaining run is finished and braced.

Separate the power

Workstations are often fed from a shared circuit or a single base feed. Before anything is removed, an electrician should confirm which stations lose power when the returned run is disconnected.

Work after hours

Removing panels and worksurfaces is loud and dusty. Most partial clear-outs are done in the evening or on weekends so remaining staff arrive to a finished, clean floor. Confirm freight elevator and dock times with the property manager.

Coordinate with construction

If a demising wall is going in, the furniture usually has to be out of its path first. Sequence the clear-out ahead of the contractor and leave room for the work.

Re-planning the space you keep

The kept space is not just the old space with more people in it. A consolidation is a good moment to fix what has not worked.

  • Seat to the busiest day, with shared seats where attendance is uneven.
  • Add meeting space. Combined teams need more rooms, not fewer. Stations freed by shared seating can become project areas.
  • Put the teams that work together side by side, even if it means moving people who were not part of the change.
  • Add storage for shared seats. Lockers and mobile pedestals keep shared desks clear.
  • Fill gaps with matching stations. Liquidation-grade stock can be installed in as little as 72 hours, remanufactured usually takes 7 to 14 days, and new takes 4 to 6 weeks.

Our Phoenix office reconfiguration service covers changing the layout of an occupied floor, and Phoenix office downsizing covers the wider right-sizing decision.

Where consolidations go wrong

  • Ignoring the commute. In a metro as spread out as the Valley, merging an East Valley and a West Valley office changes drive times for a lot of people. Attendance follows the commute, so check where staff live before choosing a site.
  • Keeping everything just in case. Storing surplus furniture for a future that may not come takes up the space you just paid to keep.
  • Waiting on a sublease with no cutoff. Open-ended waiting turns into a rushed clear-out at the end of the lease.
  • Cutting a powered run without an electrician. The stations that stay can lose power along with the ones that leave.
  • Forgetting the people who stay. Tell them what is changing, when the noisy nights are and where to go if their area is affected.

A workable sequence

  1. Confirm lease options and dates with your broker.
  2. Set the seat target and choose the space to keep.
  3. Draw the kept space and approve the plan.
  4. Walk both spaces; tag keep, move-in, swap and clear.
  5. Decide the sublease approach and set a furniture cutoff.
  6. Book electrical, IT, elevators and docks at both sites.
  7. Move in and swap pieces in the kept space first.
  8. Clear surplus from the space being returned.
  9. Handle e-waste and records with documented chain of custody.
  10. Sweep, walk the returned space with the landlord and get written acceptance.

Move keep items before clearing surplus. If the order is reversed, good pieces leave with the surplus. For the clear-out and handback, see Phoenix office decommissioning and our office downsizing checklist.

Space planning for the space you keep is free. To plan a consolidation, contact us or write to hello@officestation.com with both addresses, the handback date and a rough count of stations at each site. Every project is quoted individually.

Frequently asked questions

How do we decide which office to keep when consolidating two locations?

Compare lease terms first, then fit. The location you keep should hold the combined seat count on the busiest day, be reachable for both teams, and need the least construction to work. Furniture condition matters too: keeping the site with better, more consistent workstations means fewer pieces to move or replace. Your broker and a space planner should look at it together.

Can we give back part of a floor and stay in the rest?

Often, if the landlord agrees and the floor can be divided. The returned area usually needs a demising wall, separate access to the corridor and its own building systems, which is a construction project the landlord will want to approve. The furniture in that area has to be moved into your remaining space or cleared before the handback date.

When should we clear furniture if we plan to sublease?

Hold off clearing until the sublease direction is clear, but set a deadline. Some subtenants want the space furnished, which can help the sublease. If no deal is signed by your cutoff, clear the space so you are not racing the lease end. Put any furniture-included sublease terms in writing, including who owns and maintains it.

What is a partial clear-out?

A partial clear-out removes only some of the furniture in a space, such as surplus workstations on one side of a floor or extra storage, while the rest stays in use. It needs clear tagging, a defined work area and usually after-hours work so remaining staff are not disrupted. It is common in consolidations and floor give-backs.

How long does an office consolidation take?

Plan on several months from decision to handback, depending on lease terms and construction. The furniture work itself, moving keep items and clearing surplus, is often a few nights per area. If the kept space needs added stations, liquidation grade can be installed in as little as 72 hours, remanufactured usually takes 7 to 14 days, and new takes 4 to 6 weeks.

Rows of office seating
Start here

Ready to furnish the space?

Pre-owned designer furniture, quoted to your project, with in-stock liquidation grade installed in as little as 72 hours.