Breakroom and lounge

Breakroom and Lounge Furniture in Phoenix

How to furnish a Phoenix breakroom, cafe or lounge area that holds up to daily use, fits the room and arrives on the same schedule as the rest of the office.

8 minute read
Breakroom and Lounge Furniture in Phoenix

Photo: DPPed, CC BY-SA 3.0, via Wikimedia Commons

Short answer: Office Station supplies breakroom and lounge furniture to Phoenix-area offices: cafe and dining tables, counter and bar-height tables, stools, stacking chairs, soft seating and collaboration tables. You can buy it pre-owned, remanufactured or new, and it is planned, delivered and installed with the rest of your office. Every project is quoted individually, and space planning is free.

What breakroom and lounge furniture covers

The breakroom is the one room nearly everyone in the office uses every day. It also takes more abuse than any other space: hot coffee, wet trays, chairs dragged across the floor and tables pushed together for a birthday lunch. In a Phoenix office it often doubles as the overflow meeting room and the place people work when the floor gets loud.

A typical order includes some mix of these pieces:

  • Cafe and dining tables. Round, square and rectangular tops at standard height, on single-column or four-leg bases.
  • Counter and bar-height tables. High tops for quick coffee, a window counter or a standing huddle spot.
  • Stools and stacking chairs. Armless chairs that stack or nest so the room can be cleared for an all-hands meeting.
  • Soft seating. Lounge chairs, sofas, benches and ottomans for a quieter corner or a reception-adjacent lounge.
  • Collaboration tables. Larger tables with power where small groups can open laptops without booking a conference room.
  • Occasional tables. Side and coffee tables to go with soft seating.

Cabinets, sinks and appliances are usually part of the building's millwork and are handled by your landlord or contractor. The furniture plan works around them. If the room also needs to seat a formal meeting, see conference room furniture in Phoenix, and for a classroom setup with flip-top tables, see training room furniture in Phoenix.

Planning the room before you buy

Most breakroom mistakes come from buying tables before measuring the room. A free space plan avoids that. Here is what goes into it.

How many people eat at once

Do not seat the whole headcount. Count how many people are in the office on a busy day and how lunch actually works. A 60-person office with staggered lunches may only need seats for a fraction of the team at one time. Hybrid schedules change this again: plan for the peak in-office day, not the average.

Clearances

Each chair needs room to pull out behind it, and people need to walk past a seated person carrying a tray. Keep a clear accessible route of at least 36 inches wide through the room and to the counter, sink and refrigerator. Avoid placing tables where a door swing or an open dishwasher blocks the path.

Accessibility

The 2010 ADA Standards call for accessible dining and work surfaces to sit between 28 and 34 inches high, with knee clearance underneath. In practice that means at least some standard-height tables with bases that leave room for a wheelchair, not only high tops. Your architect or building owner has the final word on code compliance for the suite.

Power and the counter

Collaboration tables need power. Check where floor boxes and wall outlets sit before choosing a table location, since moving power is an electrician's job and is quoted separately. Keep laptop tables away from the coffee station so cords do not cross a wet floor.

For the wider layout of the whole suite, including how many workstations fit beside the breakroom, see office space planning in Phoenix.

Table heights compared

Table height sets the tone of the room. Most offices mix two heights so people can choose how long they stay.

HeightTypical table heightSeat height to matchBest useTrade-off
Standard (dining)About 29 to 30 inchesAbout 17 to 19 inchesLunch seating, accessible seating, longer conversationsTakes more floor space per seat than a counter run
CounterAbout 36 inchesAbout 24 to 26 inch stoolsWindow counters, coffee stops, quick standing chatsSome people find stools less comfortable for a full lunch
BarAbout 40 to 42 inchesAbout 28 to 30 inch stoolsStanding huddles and casual lounge cornersHardest height for many people to use; never the only option
Lounge (coffee table)About 16 to 20 inchesLounge chairs and sofasSoft seating areas and informal waitingNot suited to eating or laptop work

A common Phoenix layout puts standard-height tables in the middle of the room, a counter-height run along the window wall and a pair of lounge chairs in the quieter corner. That gives everyone a seat they can use and keeps the room flexible.

Materials that last in a Phoenix office

Breakroom furniture gets wiped down several times a day. Choose surfaces for cleaning, not only for looks.

  • Tabletops. High-pressure laminate is the workhorse: it resists stains, heat from a coffee mug and repeated cleaning. Solid surface and quartz-look tops suit higher-end cafes. Look for edges that are sealed well, because a lifted edge band lets water into the core.
  • Bases. Metal bases with adjustable glides keep tables steady on uneven slab floors, which are common in older Valley office parks.
  • Chairs and stools. Polypropylene shells, metal frames and vinyl seats wipe clean. Fabric seats look softer but stain faster near food.
  • Soft seating upholstery. Vinyl, polyurethane or tightly woven commercial fabric in a mid-tone color hides wear. Light fabrics show every spill.

Sun and heat

Many Phoenix breakrooms sit on an exterior wall with big windows, and west-facing glass takes direct afternoon sun much of the year. Over time that fades upholstery and can warm dark vinyl until it is uncomfortable to sit on. Keep soft seating out of the direct afternoon beam, or plan for window film or shades with the building. The same goes for furniture stored or delivered in summer: laminate, edge banding and foam do not like a hot truck, which is why summer deliveries are booked early in the morning.

Lounge and collaboration areas

Search for "office lounge furniture Phoenix" and you are often looking for something between a breakroom and a meeting room: a place for a quick one-on-one, a visitor waiting area or a quiet corner away from the workstations. These spaces work best when each zone has a clear job.

  • Touchdown seating. A lounge chair with a small side table, for a phone call or a short break.
  • Small huddle groups. Two to four lounge chairs or a sofa around a coffee table, with power nearby.
  • Collaboration tables. Standard or counter-height tables for four to six people with laptops, often with a screen on the wall.
  • Booths and high-back seating. Where pre-owned or new stock allows, high-back pieces cut noise and give a semi-private spot without building a room.

Lounge furniture should not replace enough real workspace. If the team needs more desks, start with office furniture in Phoenix and benching desks for open plans, then fill the lounge. If the lounge sits near the front desk, coordinate finishes with your reception desk in Phoenix so the two areas read as one space.

For a quieter-looking open area, lounge pieces can sit beside low panel workstations. Panels at 47 inches let people see across the floor while seated stations stay semi-private. See office cubicles in Phoenix for panel heights and layouts.

Pre-owned, remanufactured or new

Breakroom and lounge furniture comes in the same three grades as the rest of the office. The right one depends on your date and how much the room matters to visitors.

GradeLead timeWhat to expectGood fit
Liquidation grade (pre-owned)Installed in as little as 72 hours when in stockAs it came off a corporate floor, inspected and graded A like new, B very good or C goodStaff breakrooms, fast openings, overflow seating
RemanufacturedUsually 7 to 14 daysRefinished or reupholstered to a consistent look, where the piece allows itA visible cafe or lounge that needs a fresher finish
New4 to 6 weeksOrdered to your size, finish and fabricA branded lounge, an exact count or a specific style

Pre-owned breakroom stock depends on what Valley offices are clearing, so matching sets come and go. If you need twenty identical chairs, say so in your request, and the quote will show whether pre-owned stock covers it or whether new pieces fill the gap. Pre-owned costs well below new, and mixing grades in one room is normal: pre-owned tables and bases with new chairs, for example.

Brand names identify the original manufacturer only. Office Station is an independent reseller, not an authorized dealer of any manufacturer, and manufacturer warranties generally do not transfer to pre-owned furniture. For the full pre-owned range beyond the breakroom, see used office furniture in Phoenix.

Delivery and installation across the Valley

Breakroom furniture usually comes last in a build-out. Appliances, cabinets, sinks and flooring have to be finished first, and tables are set after the floor is clean. Plan for the breakroom to be installed in the same visit as the workstations when the room is ready, or as a short return trip if it is not.

  • Building access. Downtown and Midtown towers book docks and freight elevators by time slot. Many suites in the Scottsdale Airpark, Tempe and Chandler office parks have no dock, so trucks unload by liftgate. Share building rules with your request.
  • Summer timing. From May through September, deliveries are booked for early morning, ahead of the heat. Monsoon storms from mid-June through September usually build in the afternoon and evening, another reason to deliver early.
  • Assembly. Table bases are attached, glides leveled on the slab and soft seating unwrapped and placed to the plan. Packaging is removed.

Installation is quoted on its own line. See office furniture installation in Phoenix for how crews schedule, and office furniture delivery in Phoenix for dock, liftgate and insurance details.

Space planning is free. Send the breakroom dimensions or a floor plan, your headcount and move-in date to hello@officestation.com, or request a quote, and the plan comes back with tables, seating and clearances laid out for your room.

Frequently asked questions

Where can I buy breakroom furniture in Phoenix?

Office Station supplies breakroom and lounge furniture to Phoenix-area offices as part of a planned project: cafe tables, counter and bar-height tables, stools, stacking chairs, soft seating and collaboration tables. Pieces can be pre-owned, remanufactured or new. Send your room dimensions, headcount and address to hello@officestation.com for a free space plan and a written quote.

What size table fits an office breakroom?

It depends on the room and how many people eat at once. Round tables of 36 to 42 inches seat two to four and suit small rooms. Rectangular tables can be ganged for larger groups. Leave enough room behind each chair to pull out and walk past, and keep a clear accessible route of at least 36 inches through the space.

Should breakroom tables be standard, counter or bar height?

Standard-height tables are the easiest to use and the simplest way to meet accessibility needs. Counter height suits a quick-coffee area along a window or wall. Bar height looks casual but is harder for some people to use. Many Phoenix breakrooms mix standard tables with one counter-height run, and include at least one accessible seating spot.

What fabric holds up best on office lounge seating?

For a lounge or cafe that gets daily traffic and food, choose cleanable surfaces: vinyl or polyurethane upholstery, or tightly woven commercial fabrics rated for heavy use. Pick mid-tone colors that hide wear. In sunny Phoenix rooms, keep upholstery out of direct afternoon sun near west and south windows, which fades fabric over time.

Can I buy used lounge and breakroom furniture?

Yes, when matching pieces come off a corporate floor. Pre-owned stock varies by what offices in the Valley are clearing, and each piece carries a condition grade of A like new, B very good or C good. When you need a specific look or an exact count, new pieces take 4 to 6 weeks and can be mixed with pre-owned items.

How long does it take to furnish a Phoenix breakroom?

In-stock liquidation-grade furniture can be installed in as little as 72 hours. Remanufactured pieces usually take 7 to 14 days, and new furniture takes 4 to 6 weeks. Breakroom furniture is usually delivered with the workstations and installed after appliances, millwork and flooring are finished, so plan it into the overall move-in schedule.

Rows of office seating
Start here

Ready to furnish the space?

Pre-owned designer furniture, quoted to your project, with free space planning.