Panels and glass

Glass Stacker Cubicles: A Buyer's Guide

How glass stackers work on cubicle panels, when they are worth adding, and how to specify them without surprises.

7 minute read  ·  Updated November 2026
6x6 remanufactured hybrid workstation with glass stacker panels, black trim, white corner worksurface and box-box-file pedestal

Walk onto almost any recently furnished open office and you will see glass at the top of the cubicle panels. Glass stackers have become the standard way to keep workstations private at desk level while letting light and sightlines through. This guide explains what they are, where they work, how to specify them and how they fit into remanufactured and hybrid stations.

What a glass stacker is

A cubicle panel is built in sections stacked on top of each other. A glass stacker replaces the top fabric section with a framed glass tile. The panel keeps its overall height, so at seated level nothing changes: screens and desks are still screened, and the fabric below still absorbs sound. Above that line, light passes through.

The glass is set in a frame that matches the panel trim. Black trim with clear glass, as on our 6×6 hybrid workstations, is the most requested look right now, but light gray, white and other trim colors are available.

Panel heights and single vs double glass

Glass belongs above eye level, so it is specified on taller panels.

Panel heightGlass optionsResult
47 inchesUsually noneAlready open above the desk
53 inchesSingle row of glassSeated privacy with a bright top band
67 inchesSingle or double row of glassFull seated privacy, more daylight with double glass

A single stacker adds one band of glass. A double stacker adds two, leaving a lower fabric section at desk level. On a 67-inch panel, double glass gives the most light while still screening the desk. The 6×6 workstation guide covers panel heights in more detail.

Why offices choose glass

  • Daylight. Glass lets window light reach the middle of the floor instead of stopping at the first row of panels.
  • A more open feel without giving up seated privacy, which suits teams that want focus and connection.
  • Sightlines. Standing, you can see who is in and catch someone's eye across the floor.
  • A current look. Glass and dark trim modernize a floor, which matters on client-facing and recruiting floors.

Trade-offs to weigh

  • Acoustics. Glass reflects sound where fabric absorbs it. At desk level this matters little, because the fabric section remains. On very loud floors, single glass rather than double keeps more fabric.
  • Visual privacy when standing. If roles need full screening, keep fabric on selected panels, such as those facing a main aisle, or ask about frosted glass.
  • Cost. Glass adds parts. Many offices put glass only on panels facing windows or aisles and keep fabric on the shared spines.
  • Cleaning. Glass shows fingerprints. Plan for routine cleaning with a non-abrasive cleaner applied to a cloth.

Where to put glass on a floor plan

Glass does the most good where it lets light travel. On most floors that means:

  • Panels facing the windows. Glass on the window side of each pod lets daylight continue to the next row.
  • Panels facing main aisles. A brighter, more open walk through the floor, with desks still screened at seated height.
  • Interior pods. Stations far from windows gain the most from glass on every side.

Where glass helps less:

  • Shared spines between back-to-back stations, where a fabric panel gives each person a visual break and absorbs sound.
  • Panels beside noisy areas such as break rooms or copy areas, where full fabric dampens sound.
  • Roles that need full screening when standing, such as some HR or finance positions.

Mixing glass and fabric panels this way gives most of the light for less glass, and keeps acoustics in check.

Glass and acoustics

Fabric panels absorb some sound; glass reflects it. Because a stacker sits in the upper part of the panel and the fabric section remains at desk level, the change in sound at a seated position is modest. The difference shows on large, busy floors with hard ceilings and floors.

If sound is a concern, keep fabric on shared spines, use single rather than double glass, and look at the room as a whole: carpet, ceiling tiles and a few acoustic panels on walls often do more than the cubicle choice. The 6×6 guide covers panel heights by area.

Safety and care

  • Glass type. Ask that stacker glass is safety glass appropriate for furniture, and that it is fully seated in its frame.
  • Installation order. Glass and trim go on last, after the heavy work, so they are not knocked during the build.
  • Moving stations. Remove glass tiles before reconfiguring or moving a station.
  • Cleaning. Use a non-abrasive glass cleaner applied to a microfiber cloth, not sprayed at the panel, so the fabric below stays dry.

How to specify glass stackers

When you request a quote, state:

  1. Panel height for each area: 53 or 67 inches.
  2. Single or double glass, and which panels get it: all, spines only, or aisle and window faces.
  3. Clear glass, or ask about frosted where it is available.
  4. Trim color for the glass frames and panels.
  5. Fabric color for the sections below the glass.

A free space plan marks every glass panel, so the quote, the drawing and the installed floor match. You can also try glass on individual panels in our 3D Station Builder, and browse common layouts on the configurations page.

Glass in each grade

Glass stackers are available across the grades:

  • Hybrid: the 6×6 hybrid workstations are pictured with 67-inch panels, glass stackers and black trim, on recycled panel cores with new trim, refinished hardware, new worksurfaces and new in-stock fabric. Often around half the price of comparable new, delivered and installed in about 2 weeks in most cases.
  • Remanufactured: glass added to rebuilt panels in your chosen finishes, usually 7 to 14 days to build.
  • Pre-owned: available when a liquidated system already has glass, in its original finish. See used cubicles.
  • New: the full range of glass options from current lines, typically 4 to 6 weeks.

The grade comparison guide helps you decide between them.

To plan a glass stacker floor, send your floor plan or headcount to hello@officestation.com or use the quote request form. Space planning is free, and every project is quoted individually.

Frequently asked questions

What is a glass stacker on a cubicle?

A glass stacker is a glass tile that sits at the top of a cubicle panel in place of a fabric section. It keeps the panel's overall height, so seated privacy and acoustic separation at desk level stay the same, while daylight and sightlines pass through the top. Stackers are framed in trim that matches the panel.

Which panel heights can take glass stackers?

Glass stackers are normally specified on 53-inch and 67-inch panels, where the glass sits above seated eye level. A 67-inch panel can take a single or a double row of glass. Lower 47-inch panels are already open above the desk, so glass adds little there.

Do glass stackers reduce privacy?

Very little at desk level. The glass sits in the upper part of the panel, mostly above a seated person's eye line, so screens and desks stay screened. What changes is that the floor feels brighter and people can see across it when standing. Where more screening is needed, keep fabric on selected panels or ask whether frosted glass is available for your system.

Are glass stacker cubicles available remanufactured?

Yes. Office Station's 6×6 hybrid workstations are pictured with 67-inch panels and glass stackers. Hybrid stations reuse recycled panel cores with new trim, refinished hardware, new worksurfaces and new in-stock fabric, and are delivered and installed in about 2 weeks in most cases.

How do you clean glass stackers?

Use a standard non-abrasive glass cleaner and a soft microfiber cloth, applied to the cloth rather than sprayed at the panel so the fabric below stays dry. Avoid abrasive pads and razor scrapers on the glass and frames. Wipe fingerprints from frame edges with a damp cloth.

Do glass stackers cost more?

Glass adds parts to a station, so it adds to the cost of the panel compared with an all-fabric panel. How much depends on single or double glass, the number of panels that get it and the grade of the station. Every project is quoted individually, with glass shown clearly on the quote.

6x6 remanufactured hybrid workstations with 67-inch fabric panels, glass stackers, black trim and white L-shaped worksurfaces in a Phoenix office
New: hybrid workstations

6×6 Remanufactured Hybrid Workstations

Recycled office panel cores + new trim, refinished hardware, new worksurfaces and new in-stock fabric. An as-new workstation built on a proven panel system, without paying for an all-new one.

  • Often around half the price of comparable newThe panel cores are reused, so you pay for new finishes, not a whole new system.
  • Delivered and installed in about 2 weeksIn most cases, from an approved layout and fabric choice.
  • Other configurations available5×5, 6×8, 8×8, call center, benching and private offices, at 47″, 53″ or 67″.

See hybrid workstations Request a quote

Rows of office seating
Start here

Ready to furnish the space?

Pre-owned designer furniture, quoted to your project, with in-stock liquidation grade installed in as little as 72 hours.