Panel systems are the backbone of most cubicle offices. Each workstation is built from connecting panels that hold up worksurfaces, overhead storage and shelving, with many systems carrying power and data through the base. The result is a private, organized seat that can be reconfigured as your team changes.
Because major manufacturers build panel systems to last for years of daily use, used office panel systems are one of the best values in commercial furniture. Office Station offers them in three tiers so you can match cost, finish and timing to your project.
Three tiers, one standard station
Using a standard 6x6 workstation as the reference, the tier you choose is the biggest factor in cost and lead time. Station size, panel height, finishes and quantity matter too, so every project is quoted individually. Furniture quotes exclude electrical, delivery and professional installation.
Liquidation-grade
These are pre-owned stations sold in the condition they came out of an office, sorted by grade. Grade A is like new, B is very good and C is good. This is the fastest, lowest-cost way to seat a team, and in-stock stations can be ready in as little as 72 hours.
Remanufactured
Remanufactured stations start as pre-owned and are refreshed for a more uniform appearance across the floor. They cost less than new and usually ship in 7 to 14 days, which makes them a strong middle ground for client-facing spaces.
New
New stations make sense when you need specific finishes, dimensions or components that are not available pre-owned, and when you can plan around a 4 to 6 week lead time.
What makes up a panel workstation
When you compare quotes, make sure you are comparing the same parts. A typical panel workstation is built from these components:
- Panels. The walls of the station, usually fabric-covered, sometimes with glass or marker-board inserts. Heights vary, and a single station may use more than one.
- Connectors and posts. The hardware that joins panels at corners and in straight runs. Missing connectors are one of the most common problems with used systems, so confirm they are included.
- Worksurfaces. Straight, corner or L-shaped desktops that hang from the panels or sit on supports.
- Pedestals. Rolling or fixed drawer units under the worksurface, often with locks.
- Overhead storage and shelves. Bins, flipper doors or open shelves hung from the panels.
- Base raceways. Channels at the bottom of powered panels that carry electrical and data cabling.
- End panels and trim. Finishing pieces that give runs of stations a clean look.
A standard 6x6 station assumes a standard kit. If you need extra shelves, a second pedestal or taller panels on one side, mention it in your quote request so the quote reflects what you actually get.
Brands you will find
Our pre-owned inventory can include panel systems and workstation components from Herman Miller, Steelcase, Knoll, Haworth, Teknion, Allsteel, Kimball, AIS and Friant. Availability changes as inventory comes in, so ask about specific product lines when you request a quote.
Office Station is an independent reseller, not an authorized dealer for any of these manufacturers. Manufacturer warranties generally do not transfer to pre-owned furniture.
What goes into an installed floor
Furniture is only part of the budget. Here is how the add-ons work:
- Space planning: free.
- Installation: quoted with your project, based on the number of stations, building access and the complexity of the layout.
- Delivery in Greater Phoenix: quoted with your project, based on your address, building access and the size of the order.
- Delivery elsewhere nationwide: freight quoted per project.
- Electrical: not included; hire a licensed electrician for powered panels.
On a large floor, larger orders are quoted together, and your quantity is reflected in the written quote. The furniture, delivery and installation each appear as their own line. Every project is quoted individually. Request a free quote and free space plan.
Buying checklist for used panel systems
- Station size. 6x6 is a common standard, but confirm what fits your square footage and roles.
- Panel height. Lower panels keep teams connected; taller panels give more privacy for calls.
- Power and data. Decide whether you need powered panels or will feed stations another way.
- Storage. Count pedestals, overheads and shelves per station.
- Finish consistency. For a uniform look, choose remanufactured or ask whether enough grade A stations from one product line are available.
- Future growth. Order compatible extra panels and parts now if you expect to add seats.
- Timeline. Match your move-in date to the lead time of each tier.
- Site access. Confirm dock, freight elevator and after-hours rules for installers.
Related options
If you are still deciding on layout, read our comparison of open offices vs cubicles. Pair your stations with pre-owned office chairs, or explore the full pre-owned furniture lineup. Replacing an older panel system? In our Southwest liquidation markets, we walk your current furniture for free and recommend the best route for it through office furniture liquidation.
Teams in the Phoenix area can also start from a local page, such as used cubicles in Phoenix.
Frequently asked questions
What is a panel system?
A panel system is a set of freestanding, connectable walls that support worksurfaces, storage and often power and data wiring. Panels link together to create individual workstations in almost any layout. Because they are modular, you can add, remove or rearrange stations as needs change.
Can I mix used panels with the panels I already have?
Sometimes. Panels from the same manufacturer and product line may connect, but different lines or brands usually do not. Send the brand, product line and a few photos to hello@officestation.com and we will tell you what fits.
Do used panel systems include electrical?
Many panel systems have built-in raceways for power and data, but our furniture quotes exclude electrical work. A licensed electrician will need to connect powered panels to your building. Plan that into your budget and schedule.
How long does installation take?
It depends on station count and site access. Liquidation-grade stations can be ready in as little as 72 hours when in stock, remanufactured usually in 7 to 14 days and new in 4 to 6 weeks. Installation is quoted with your project, based on the number of stations, building access and the complexity of the layout.
Do used panel systems come with a warranty?
Office Station is an independent reseller of pre-owned furniture, not an authorized dealer for any brand, and manufacturer warranties generally do not transfer to pre-owned pieces. Each item carries a condition grade of A, B or C so you know what you are buying.
